How To Fix Broken Vape

For Australian vapers who rely on quality devices from Auvape VAPE Store, discovering your vape is broken can put a damper on your day, especially when you’re reaching for a trusted IGET Legend or ALIBARBAR INGOT. But before you toss it in the bin or rush to reorder, many common vape issues have straightforward DIY fixes that can save you time and money. Whether you’re a beginner using a disposable or an experienced vaper with a box mod, understanding how to diagnose and resolve problems will keep your vaping experience smooth and consistent.

Auvape VAPE Store: Your Go-To for Reliable Vapes & Expert Support

Auvape VAPE Store is renowned across Sydney, Melbourne, Brisbane, and Perth for curating premium disposable vapes (like IGET and ALIBARBAR) and accessories that deliver consistent performance. While their devices are built to high standards, even the most reliable vapes can encounter hiccups due to user error, storage issues, or normal wear and tear. The good news is that most of these issues don’t require professional repair, with a few simple tools and knowledge, you can get your vape back up and running in minutes.

Common Broken Vape Issues & Fixes by Device Type

Vape problems vary depending on the type of device you’re using. Below, we break down the most frequent issues for each category and step-by-step fixes tailored to Australian vapers.

Disposable Vapes (IGET & ALIBARBAR from Auvape VAPE Store)

Disposables are the most popular choice for on-the-go vapers, thanks to their simplicity. But even top brands like IGET and ALIBARBAR can face issues:

Device Won’t Hit (No Response When Inhaling)

Fix 1: Remove residual packaging: Many disposables come with plastic seals over airflow vents or mouthpieces that are easy to overlook. Peel off all stickers to ensure unobstructed airflow, this is a common fix for IGET Bar Plus and ALIBARBAR INGOT models.
Fix 2: Dislodge sensor blockages: Gently tap the bottom of the device against your palm to move any loose e-liquid bubbles or debris that might be blocking the draw-activated sensor.
Fix 3: Recharge if applicable: Newer IGET models (like the IGET King) include a USB-C charging port. If the battery is dead, plug it into a charger for 30-60 minutes. Auvape often includes charging cables with these rechargeable disposables for added convenience.

Burnt Taste

Fix 1: Let the coil cool: Continuous vaping can overheat the coil. Set the device aside for 5-10 minutes to allow it to cool and the e-liquid to re-saturate the coil.
Fix 2: Adjust storage position: If you stored your disposable upside down, the coil might be starved of Capacity. Flip it right-side up and wait 2-3 minutes before using again.
Fix 3: Check e-liquid levels: A persistent burnt taste usually means the e-liquid is depleted. Head to Auvape VAPE Store’s website to browse their wide range of replacement disposables in Options like Mango Ice and Spearmint.

LED Light Flashes but No Vapor

Fix 1: Clean the mouthpiece: Use a cotton swab dipped in isopropyl alcohol to wipe away any gunk or e-liquid buildup in the mouthpiece and airflow vents.
Fix 2: Verify battery connection: For rechargeable disposables, ensure the charging port is clean and the cable is securely connected. If the LED flashes 3-5 times, it may indicate a low battery, charge it fully before trying again.

Pod Systems

Pod systems are popular for their balance of portability and customization. Common issues and fixes include:

No Vapor or Weak Hits

Fix 1: Clean pod contacts: Over time, e-liquid residue can build up on the pod’s metal contacts, preventing a proper connection with the device. Use a dry cotton swab to wipe the contacts on both the pod and the device.
Fix 2: Replace the pod: Pod coils wear out after 1-2 weeks of regular use. If cleaning doesn’t work, swap in a new pod, Auvape stocks compatible pods for leading brands like RELX and Uwell.
Fix 3: Adjust wattage: If your device has adjustable wattage, lower it slightly. High wattage can burn out the coil prematurely or cause weak hits if the pod isn’t rated for it.

Leaking Pods

Fix 1: Avoid overfilling: If you use refillable pods, don’t fill past the max line, excess e-liquid can seep into the device’s airflow system.
Fix 2: Prime the coil correctly: Before using a new pod, let it sit for 5 minutes after filling to allow the e-liquid to soak into the coil. Taking a few slow, gentle inhales without activating the device can also help.
Fix 3: Tighten the pod: Ensure the pod is securely snapped into place. A loose seal can cause e-liquid to leak through the gaps.

Box Mods & Advanced Devices

For experienced vapers using box mods, issues often relate to battery or coil connections:

Screen Won’t Turn On

Fix 1: Check battery connections: Remove the battery cover and ensure the batteries are inserted correctly (matching positive and negative terminals). Clean any corrosion on the battery contacts with a cotton swab and isopropyl alcohol.
Fix 2: Replace batteries: If the batteries are old or swollen, swap them with new, high-quality 18650 batteries (avoid cheap knockoffs to prevent safety risks).
Fix 3: Reset the device: Most box mods have a reset function, hold the power button for 10-15 seconds to reboot the device.

No Output from the Coil

Fix 1: Check coil installation: Ensure the coil is screwed into the tank tightly but not over-tightened. A loose coil can cause a poor connection.
Fix 2: Replace the coil: Coils wear out over time, if you notice a burnt taste or no vapor, it’s time to install a new one. Auvape stocks coils for brands like SMOK and Geekvape.
Fix 3: Update firmware: Some advanced mods require firmware updates to function correctly. Visit the manufacturer’s website to download the latest firmware and follow the instructions to install it.

When to Stop Fixing and Replace Your Vape

While many issues are fixable, there are times when replacing your device is the safest and most cost-effective option:

Swollen batteries: A swollen battery is a safety hazard, dispose of it responsibly at a designated e-waste facility and purchase a new device from Auvape.
Cracked or shattered tanks: A cracked tank can leak e-liquid and damage the device’s internal components. Replacing the tank may be more expensive than buying a new pod system or disposable.
Persistent electrical issues: If your device keeps shutting off randomly or the LED flashes erratically after multiple fixes, it’s likely a faulty internal component. Auvape’s affordable disposables and pod systems make replacing it a hassle-free choice.

Frequently Asked Questions (FAQ)

Can I fix a disposable vape from Auvape VAPE Store?
Yes, many common issues with IGET and ALIBARBAR disposables (like no hits or weak vapor) have simple fixes, such as removing packaging seals, recharging, or dislodging e-liquid bubbles.

Why is my IGET disposable from Auvape not hitting?
The most common reasons are blocked airflow (from leftover packaging), a dead battery (for rechargeable models), or a blocked sensor. Try tapping the device or charging it first.

How do I fix a burnt taste in my ALIBARBAR vape?
Let the device cool down for 5-10 minutes, ensure it’s stored right-side up, and avoid continuous vaping. If the taste persists, the e-liquid is likely depleted, and you’ll need a new disposable.

Is it safe to disassemble a vape device?
Disassembling disposable vapes is not recommended, as it can expose you to battery acid or damage the device beyond repair. For pod systems or mods, only disassemble parts that are designed to be user-replaceable (like pods or coils).

My pod system is leaking, what should I do?
Check if you overfilled the pod, ensure the pod is tightly sealed, and prime new coils properly. If leaking continues, replace the pod or contact Auvape’s customer support for further advice.

Can I recharge a non-rechargeable disposable vape?
No, attempting to recharge a non-rechargeable disposable can cause the battery to overheat or explode. Stick to rechargeable models like the IGET King if you want to extend the device’s life.

Why is my box mod screen not turning on?
This is usually due to dead or incorrectly inserted batteries. Check the battery connections, replace old batteries, or try resetting the device by holding the power button for 10 seconds.

When should I replace my vape instead of fixing it?
Replace your vape if the battery is swollen, the tank is cracked, or electrical issues persist after multiple fixes. For disposables, if the e-liquid is depleted or the coil is burnt beyond repair, replacement is the best option.

Does Auvape VAPE Store offer repairs for broken vapes?
Auvape does not offer in-house repairs, but their customer support team can help diagnose issues and recommend fixes. For most cases, replacing the device or faulty part is more cost-effective than repair.

Where can I find more vape maintenance tips?
For visual, step-by-step tutorials on fixing broken vapes and maintaining your device, check out vape troubleshooting guides (opened in new window) for expert advice.

for keeping your vape in top shape, a little knowledge goes a long way. And if fixes aren’t enough, Auvape VAPE Store has you covered with a wide selection of premium disposables, pod systems, and accessories delivered fast to Sydney, Melbourne, Brisbane, and Perth. Whether you’re a beginner or an experienced vaper, Auvape VAPE Store is your trusted partner for all things vaping.